View 550D_235549.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

550D
Vishay Sprague
Solid-Electrolyte TANTALEX(R) Capacitors for High Frequency Power Supplies
FEATURES
* Hermetically-sealed, axial-lead solid tantalum capacitors * Small size and long life * Exceptional capacitance stability and excellent resistance to severe environmental conditions * The military equivalent is the CSR21 which is qualified to MIL-C-39003/09
APPLICATIONS
Designed for power supply filtering applications at above 100kHz
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55C to + 85C. (To + 125C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25C. 20% and 10% standard. 5% available as a special. Dissipation Factor: At 120 Hz, + 25C. Dissipation factor, as determined from the expression 2fRC, shall not exceed the values listed in the Standard Ratings Tables. DC Leakage Current (DCL Max.): At + 25C: Leakage current shall not exceed the values listed in the Standard Ratings Tables. At + 85C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables. At +125C: Leakage current shall not exceed 15 times the values listed in the Standard Ratings Tables. Life Test: Capacitors shall withstand rated DC voltage applied at + 85C for 2000 hours or derated DC voltage applied at + 125C for 1000 hours. Following the life test: 1. DCL shall not exceed 125% of the initial requirement. 2. Dissipation Factor shall meet the initial requirement. 3. Change in capacitance shall not exceed 5%.
ORDERING INFORMATION
550D MODEL 006 2 R DC VOLTAGE CASE STYLE NUMBER RATING AT + 85C CODE This is expressed in This is expressed in picofarads. The X0 = 20% See Ratings 2 = Insulated volts. To complete the first two digits are the significant figures. X9 = 10% sleeve. and Case three-digit block, zeros Codes Table. The third is the number of zeros to X5 = 5% precede the voltage follow. Standard capacitance ratings Special Order. rating. are in accordance with EIA preferred number series wherever possible. 157 CAPACITANCE X0 CAPACITANCE TOLERANCE T PACKAGING T = Tape and Reel
DIMENSIONS in inches [millimeters]
1.500 0.250 [38.10 6.35] L 1.500 0.250 [38.10 6.35] D Dia.
Solid Tinned Leads J Max.
0.047 [1.19] Max. 0.125 [3.18] Max.
WITH INSULATING SLEEVE* CASE CODE R S D 0.289 0.016 [7.34 0.41] 0.351 0.016 [8.92 0.41] L 0.686 0.031 [17.42 0.79] 0.786 0.031 [19.96 0.79] J (MAX.) 0.822 [20.88] 0.922 [23.42] AWG NO. 22 22
LEAD SIZE NOM. DIA. 0.025 [0.64] 0.025 [0.64]
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body.
www.vishay.com 24
For technical questions, contact tantalum@vishay.com
Document Number: 40017 Revision 13-Jun-02
550D
Solid-Electrolyte TANTALEX Capacitors for High Frequency Power Supplies
STANDARD RATINGS
CAPACITANCE (F) CASE CODE PART NUMBER* CAP. TOL. 20% PART NUMBER* CAP. TOL. 10% MAX. DCL @ + 25C (A) MAX. DF @ + 25C 1kHz (%) MAX. ESR @ + 25C 100kHz (Ohms)
(R)
Vishay Sprague
6 WVDC @ + 85C, SURGE = 8 V . . . 4 WVDC @ + 125C, SURGE = 5 V 150 180 220 270 330 R R S S S 550D157X0006R2 550D187X0006R2 550D227X0006S2 550D277X0006S2 550D337X0006S2 550D157X9006R2 550D187X9006R2 550D227X9006S2 550D277X9006S2 550D337X9006S2 9 11 12 13 15 10 10 10 10 12 0.065 0.060 0.055 0.050 0.045
10 WVDC @ + 85C, SURGE = 13 V . . . 7 WVDC @ + 125C, SURGE = 9 V 82 100 120 150 180 220 R R R S S S 550D826X0010R2 550D107X0010R2 550D127X0010R2 550D157X0010S2 550D187X0010S2 550D227X0010S2 550D826X9010R2 550D107X9010R2 550D127X9010R2 550D157X9010S2 550D187X9010S2 550D227X9010S2 8 10 12 15 18 20 8 8 8 8 8 10 0.085 0.075 0.070 0.065 0.060 0.055
15 WVDC @ + 85C, SURGE = 20 V . . . 10 WVDC @ + 125C, SURGE = 12 V 56 68 82 100 120 150 R R S S S S 550D566X0015R2 550D686X0015R2 550D826X0015S2 550D107X0015S2 550D127X0015S2 550D157X0015S2 550D566X9015R2 550D686X9015R2 550D826X9015S2 550D107X9015S2 550D127X9015S2 550D157X9015S2 8 10 12 15 18 20 6 6 6 8 8 8 0.100 0.095 0.085 0.075 0.070 0.065
20 WVDC @ + 85C, SURGE = 26 V . . . 13 WVDC @ + 125C, SURGE = 16 V 27 33 39 47 56 68 82 100 R R R R S S S S 550D276X0020R2 550D336X0020R2 550D396X0020R2 550D476X0020R2 550D566X0020S2 550D686X0020S2 550D826X0020S2 550D107X0020S2 550D276X9020R2 550D336X9020R2 550D396X9020R2 550D476X9020R2 550D566X9020S2 550D686X9020S2 550D826X9020S2 550D107X9020S2 5 7 8 9 11 14 16 20 5 5 5 6 6 6 6 8 0.145 0.130 0.120 0.110 0.100 0.095 0.085 0.075
35 WVDC @ + 85C, SURGE = 46 V . . . 23 WVDC @ + 125C, SURGE = 28 V 8.2 10 12 15 18 22 27 33 39 47 R R R R R R S S S S 550D825X0035R2 550D106X0035R2 550D126X0035R2 550D156X0035R2 550D186X0035R2 550D226X0035R2 550D276X0035S2 550D336X0035S2 550D396X0035S2 550D476X0035S2 550D825X9035R2 550D106X9035R2 550D126X9035R2 550D156X9035R2 550D186X9035R2 550D226X9035R2 550D276X9035S2 550D336X9035S2 550D396X9035S2 550D476X9035S2 3 4 4 5 6 8 9 11 14 16 4 4 4 4 4 4 4 5 5 5 0.250 0.230 0.210 0.190 0.175 0.160 0.145 0.130 0.120 0.110
50 WVDC @ + 85C, SURGE = 65 V . . . 33 WVDC @ + 125C, SURGE = 40 V 550D565X0050R2 R 550D565X9050R2 5.6 550D685X0050R2 R 550D685X9050R2 6.8 550D825X0050R2 R 550D825X9050R2 8.2 550D106X0050R2 R 550D106X9050R2 10.0 550D126X0050R2 R 550D126X9050R2 12.0 550D156X0050R2 R 550D156X9050R2 15.0 550D186X0050R2 R 550D186X9050R2 18.0 550D226X0050S2 S 550D226X9050S2 22.0 *Insert capacitance tolerance code "X5" for 5% units (special order). Document Number: 40017 Revision 13-Jun-02 4 4 5 5 6 8 9 11 3 3 3 3 3 3 4 4 0.300 0.275 0.250 0.230 0.210 0.190 0.175 0.160
For technical questions, contact tantalum@vishay.com
www.vishay.com 25
550D
Vishay Sprague
Solid-Electrolyte TANTALEX(R) Capacitors for High Frequency Power Supplies
"A"
TAPE AND REEL PACKAGING in inches [millimeters]
13 [330.2] STANDARD REEL TAPE SPACING B 1.126 to 3.07 [28.6 to 78.0] I.D. REEL HUB 1.374 to 3.626 [34.9 to 92.1] A
COMPONENT SPACING
0.047 [1.19] MAX. OFF CENTER (1.a) 0.125 [3.18] MAX. 0.250 [6.35] (3.b)
0.625 0.062 [15.88 1.57] DIA. THRU HOLE LABEL (4.a) "A" 0.750 [19.05] SECTION "A" - "A"
0.031 [0.79] (3.f) (BOTH SIDES) ( 3.f)
TYPE 550D UNITS WITH INSULATING SLEEVE CASE CODE R S
LEAD SIZE
COMPONENT SPACING
TAPE SPACING
UNITS PER REEL
D
L
J (MAX.) AWG NO. NOM. DIA. 0.822 [20.88] 0.922 [23.42] 22 22 0.025 [0.64] 0.025 [0.64]
A 0.400 0.015 [10.16 0.38] 0.400 0.015 [10.16 0.38]
B 2.875 0.062 [73.03 1.57] 2.875 0.062 [73.03 1.57] 500 500
0.289 0.016 0.686 0.031 [7.34 0.41] [17.42 0.79] 0.351 0.016 0.786 0.031 [8.92 0.41] [19.96 0.79]
STANDARD REEL PACKAGING INFORMATION
1. Component Leads: a. Component leads shall not be bent beyond 0.047" [1.19mm] maximum from their nominal position when measured from the leading edge of the component lead at the inside tape edge and at the lead egress from the component. b. The 'C' dimension shall be governed by the overall length of the reel packaged component. The distance between flanges shall be 0.125" to 0.250" [3.18mm to 6.35mm] greater than the overall component length. 2. Orientation: a. All polarized components must be oriented to one direction. The cathode lead tape shall be a color and the anode lead tape shall be white. 3. Reeling: a. Components on any reel shall not represent more t h a n two date codes when date code identification is required. b. Component leads shall be positioned between pairs of 0.250" [6.35mm] tape. c. The disposable reels have hubs with corrugated fiber board flanges and core or equivalent. d. A minimum of 12" [304.8mm] leader of tape shall be provided before the first and after the last component on the reel. e. 50 or 60 lb. Kraft paper must be wound between layer of components as far as necessary for component protection. Width of paper to be 0.062" to 0.250" [1.57mm to 6.35mm] less than the 'C' dimension of the reel.
www.vishay.com 26
f. A row of components must be centered between tapes 0.047" [1.19mm]. In addition, individual components may deviate from center of component row 0.031" [0.79mm]. g. Staples shall not be used for splicing. Not more than 4 layers of tape shall be used in any splice area and no tape shall be offset from another by more than 0.031" [0.79mm] non-cumulative. Tape splices shall overlap at least 6" [152.4mm] for butt joints and at least 3" [76.2mm] for lap joints and shall not be weaker than unspliced tape. Universal splicing clips may also be used. h. Quantity per reel shall be controlled so that tape components and cover shall not extend beyond the smallest dimension of the flange (either across flats or diameter). Once the quantity per reel for each part number has been established, future orders for that part number shall be packaged in that quantity. When order or release quantity is less than the established quantity, a standard commercial pack is to be used. i. A maximum of 0.25% of the components per reel quantity may be missing without consecutive missing components. j. Adequate protection must be provided to prevent physical damage to both reel and components during shipment and storage. 4. Marking: a. Minimum reel and carton marking shall consist of the following: Customer Part Number, Purchase Order No., Quantity, Package Date, Manufacturer's name, Electrical Value, Date Code, Vishay Sprague Part Number and Country of Origin.
Document Number: 40017 Revision 13-Jun-02
For technical questions, contact tantalum@vishay.com

▲Up To Search▲

Price & Availability of 550D

	To Download 550D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .